Featured product
Built for
crazy tough
materials
Cuts through wood, metal and stone like butter.
Shop nowShop by category
Our featured product
Circular saw blades for wood, metal, aluminum and fiber cement.
High-density tungsten carbide and inlay teeth brazing give higher nail impact resistance and a longer cutting life.
A thin kerf cuts fast and accurately, needing 30% less power compared with a standard blade.
A laser-cut, hardened steel body reduces noise and vibration while you cut.
The BLACK ICE anti-stick shield reduces friction, heat and corrosion for smooth, clean cuts.
Laser-cut expansion slots and stabilizer vents, plus a diamond knockout. Fits corded and cordless circular saws.
Hi-density carbide teeth
Extreme durability
Thin kerf design
Minimum waste & burrs
Laser-cut body
Precise cutting experience
Black Ice™ shield
Advanced anti-stick protection
Expansion slot dispensing
Vibration & noise reduction
Proof in every cut
Real jobs. Real cuts. Real reviews.
“This one from CRALY has been serving me well. I haven’t had any issues with them.”
Full video“There doesn't seem to be any tear-out on either side of this piece of plywood… pretty satisfied with it.”
Full video“Every single time he cuts a piece of metal, he comes in and he says that it cuts just like butter.”
Full videoCustomer reviews
Good affordable saw blade
Tough carbide for durable cutting life: high-density tungsten carbide and inlay teeth brazing technology for higher nail impact resistance and longer cutting life of the blade great price
Mrs. Houck
A good blade
This is a 60 tooth finish blade with ATB tooth design. I did rip cuts on all samples as well cross cut. All of the other boards had smooth cuts in both rip and crosscut instances.
Gary G
Great blade so far!
Regardless of the blade, we're not talking about cutting through pine, after all. A few drops or a spray of cutting fluid also help grease the cuts along and keep the teeth a bit cooler.
Jeffrey L.
Great Quality Saw Blade
The saw cuts efficiently through wood, is very sharp, and after quite a few cuts is still as sharp as when it was first put on. Great saw blade and great quality.
Jamie
Awesome bushing set
This review is easy; this bushing set is awesome. Rarely do I find a product that not only fits my needs, but does it with great value and goes beyond what I would expect.
Water Monkey
nice saw blade
properly shaped to not bite in too much and to give a good clean cut in soft non ferrous metals.. I believe this to be a good value for money spent. Self cleaning design of high quality.
L&S
Excellent Diamond Wheel
I used this cutting wheel to slice a geode in half. It handled it amazingly well and still looks brand new. It cuts much better than the low price would suggest.
D. Baker
Sharp with slick coating.
The CRALY 4-1/2 Inch blades come well packaged with a protective plastic retainer around the teeth.I made an error when I ordered these and was only able to use with my cordless 4.5" angle grinder.In the grinder the 24 tooth blade made quick work of cutting sections of 2X4s and the 36 tooth blade worked very well with plywood. Not super accurate with a grinder but very quick and efficient nonetheless. Should be great for doing cutoffs of PVC and ABS tube and pipe.The slick coating did seem to help and it will interesting to see how long it will last.I would like to get the same blades for my 3/8" arbor saw for a more controlled series of tests. I'm confident those will perform as well as these given the same coating.Bottom line: Recommended.
Mea Sententia Verified buyer
Very clean cut - 12mm Laminate flooring
I bought this cool mini Craftsman circ-saw and needed a fine blade for 12mm laminate flooring. So far these saw blades have been fantastic.
Mark Verified buyer
NIce sharp blade with clean cuts
These blades seem well made and cut well. I tested on a few pieces of hardwood and deckboard that they went thru without issues. The blades say they have a 7/8 arbor but I did need to use the included adapter to fit snuggly on the shaft of my Ryobi saw. These are only 4-1/2 round blades so they are only good for cutting material up to around 1"thick, which is fine for plywood but not 2x4's. Overall they are solid blades that made some nice, clean cuts.
PequalsI2R Verified buyer
Very good blades
Very good blades. I am redoing pontoon boat and having to cut most of the plywood off. I have hit metal a few times and the blade still works great. Would buy again.
Gem Verified buyer
A dynamic, sharp, and well made set of 4.5" saw blades
To begin, I'd like to put out a word-to-the-wise: be certain that your tool (mini circular saw, grinder) works with a 7/8" or a 5/8" arbor, as these blades are designed for 7/8", but come with an impressively snug-fitting reducer to allow 5/8" to work. I somehow managed to think my saw takes a 7/8", but it actually takes a 3/8", and so I ended up having to borrow a saw to cut through some framing I was trying to take apart.With that being said, these blades are an excellent value. They are sharp and efficent to use. Plus, because of the two different blades that it comes with (a 24-tooth framing blade and a 36-tooth fine finish blade), they are useful for both rough work and detailed work. While I don't use them all that frequently, I have not noticed any especially rapid dulling of blades.Overall, for this price, you can't go wrong (unless your tool can't use them 🙃).
Ryan Verified buyer
Works great!
These blades work great and so far I have only had to change the blade after 100-plus cuts! So a great price and value!
Flip Masters Verified buyer
Tough little blades for the price.
I know its not rated for it, but I used the 36 tooth blade to cut several pieces of 1/8th inch aluminum signage and it handled it perfectly, with plenty of life left to cut wood afterwards. Earned their keep in my book
Amazon Customer Verified buyer
Nice blades - 7/8" Arbor
These appear to be really nicely made blades. They are sharp, feel balanced and have a lot of nice features you would find in a high-quality blade. Unfortunately, I made the same mistake as a couple others, I didn't look closely at the Arbor size. My small saw has a smaller Arbor than the 7/8" Arbor on this blade, so I'll have to buy an adaptor to use these.
Renee C. Verified buyer
Stays sharp and provides smooth cut to wood
This blade provides much smoother cuts than that provided with a 24 tooth blade. The carbide teeth will stay sharp much longer than steel teeth. Those are the two most important considerations when selecting a blade for cutting wood. This blade is a little slower than a 24 tooth blade but the results are far superior.
James Verified buyer
Great replacement blade
This fit great in my DeWalt DCS571B circular saw with the 4.5" blade. I used these to cut bead board for putting up walls in our shed. It did great without splintering or binding up on me at all. The quality and precision of these blades is quite good, thick, with no wobble at all - well balanced.
Schmedved Verified buyer
Very Nice
Very nice and a great value. Excellent packaging means they will show up in perfect condition. Sharp and thin kerf. Includes spacers for different size mandrels. All things considered, these are a huge value!Made in China
Jim Verified buyer
Great blade
Bottom line - would recommendOrdered these for a couple projects around the house. The saw I was planning on using only had 24T blades, which was a little too rough cut for what I was doing. I saw these and for the price decided to order them.The quality of the blades is on par with much more expensive blades found at the local hardware store, so I am really glad I decided to given them a try. Nice clean cuts and excellent performance.The one thing to note is the size of the arbor. I made the mistake of not looking at this before ordering them. Unfortunately, the saw I was planning on using is only a 3/8". So even with the included bushings, I couldn't get this to work with my saw. I ended up borrowing my father's saw, which has the appropriate arbor and was able to use these. I may look for a 7/8 to 3/8 bushing, as my saw does have a 1" blade flange that would still allow me to secure this blade. As this was my mistake, I did not take off any stars for the product...it is clearly stated, I just didn't realize it.Overall I'm satisfied with these.
JH Verified buyer
Nice durable Blade For My Small Finish Corded Saw
These are nicely made, durable saw blades with very sharp teeth I got for my powerful 4 1/2” Corded Circular Saw. The ring adapters provided allowed the blade to fit my arbor perfectly. The cutting action is precise and the teeth are sharp enough so that when I make the up cuts, minimal splintering is done so I don’t have to score the upside first. Works well with the high rpm speed and excessive torque of the saw for finish carpentry and cabinet making.
Stephen J Key, Author of ‘Fate Stalks a Hero’ series and ‘The Saga of Heracles Penoit’ Verified buyer
CRALY Blades FTW!
Whenever I prepare to use a blade in any of my power tools, I inspect them carefully for any damage or build flaws. As soon as you open the package, you know that you're looking at a quality pair of circular saw blades. And for $14 for 2 blades, you know that you're getting value for your money.The 36 tooth blades have sharp carbide-tipped teeth with a deep gullet and tooth tips angled for a smooth cut. The blade plate has a thin 1 mm kerf with anti-vibration technology and a 7/8" arbor. I can't find any flaw in the build quality and finish.Using the blade provides a clean smooth cut in either 3/4" plywood, pine, or poplar and even oak with little burn marks on the latter depending on thickness and how you hold your tool. Very pleased with the performance.
Maestroso Verified buyer
Saves buying a trim saw.
The CRALY 4-1/2 Inch Wood Cutting Framing/Fine Finish Circular Saw Blades are a great accessory for cutting wood trim with an angle grinder. I needed to cut out some wood trim on my house and I don't own a 4 1/2 inch circular saw. Using the 36 tooth blade with my angle grinder blade gave me straight and clean cuts and was much easier and straighter than using a Sawzall. Overall, these blades perform well and cut clean and straight with an angle grinder.
raverson Verified buyer
Beautiful, clean cuts. A+
High density carbide tipped, vents for minimal vibrations and noise (they just look plain awesome, too), 1.6mm kerf, 36 ATB, and most importantly, 4 1/2 in. dia., so standard fit for most circular saws. Cuts like a beast. Love it. It looks and acts the way a saw blade should. Excellent.
Mía Verified buyer
GREAT blades. Actually surprised!
These are actually fantastic blades. I was genuinely surprised by how well they cut. Very clean cuts, very sharp blades and seem to be holding up well. They were exactly as described by the seller and are very much worth purchasing. I highly recommend these blades. Thin and clean cuts, great value.
John Verified buyer
Nice clean cut
This blade does an excellent job of making a clean cut through plywood or laminate without tearing up the edges along the cut line. I tried it without the usual tape along the cut line to see how well and smooth the cut went and I was impressed. It was not perfect but it was very good. It was, however, somewhat better when I used my usual masking tape along the cut line regimen.
Typical Consumer Verified buyer
Fits Worx saw... So Happy..
So happy when I received these and they were a perfect fit for my one handed corded Worx saw. They arrived in a nice package with the edges wrapped. The quality looks great and the fit was amazing. I will be using these to trim all my lumber next week on my 10' x 10' shed so I will update on durability. God Bless, Richard W.
Richard W. Verified buyer
good blade, runs smooth
these blades run smoth, no vibration. Its cutting well so far and looks well built.
Joe Blount Verified buyer
Nice thin kerf. Fits my Dewalt Angle Grinder
The blades have a nice thin kerf. I really don’t like to use wood cutting blades on my angle grinder, but sometimes it’s the only tool that will do the job. These seem well balanced and are carbide tipped so should last a lifetime if I can avoid nails. These are reasonably priced for a set of two.
Pav Verified buyer
Good little saw blades
This is a good set of blades. They are small, meant for a small circular saw or grinder and won't fit a larger saw. Thin curf and very sharp blades that seem to still be sharp after several uses. The blades came well packaged in a small cardboard box and each blade had a plastic tooth protector on them. A good buy for smaller saws.
Keeya Judd Verified buyer
Anytime
you need us
Reach out to us if you have inquiry about the CRALY products, services or becoming our partnership.
